Waters Acquity H-Class FTN SM-FTN Sample Manager (186015017) with H-Class Column Heater – Active CM-A (186015042)

This refurbished Waters Acquity H-Class FTN SM-FTN Sample Manager (186015017) with H-Class Column Heater – Active CM-A (186015042) is fully tested in working condition

Including:

• • Waters Acquity H-Class FTN SM-FTN Sample Manager (186015017) with H-Class Column Heater – Active CM-A (186015042)
  • Installation guide and user documentation
  • Power and communication cables
  • 90 Days Warranty

Overviews:

Sample manager-flow through needle

The sample manager-flow through needle (SM-FTN) uses a direct-injection mechanism to inject samples drawn from plates and vials onto a chromatographic column. Optional extension loops (installed between the sample needle and the injection valve) can increase the injection volume beyond that of the sample needle. The sample manager-flow through needle can also dilute samples using the auto-dilution option.

Column heater

Column temperature variations can shift peak retention times and alter peak shapes, increasing the difficulty of achieving precise results. The ACQUITY UPLC H-Class system’s column heater helps to ensure precise, reproducible separations by controlling the column temperature. The column heater heats the column compartment to any temperature from 20 ºC (68 ºF) above ambient to 90 ºC (194 ºF). An active preheating device is used to heat the incoming solvent before it enters the column. The column compartment can accommodate columns of 2.1 mm to 4.6 mm I.D. and 50 to 150 mm length. Tip: Active preheating is the default configuration for the ACQUITY UPLC H-Class system. An optional, passive, column stabilizer is available for existing chromatographic methods that are not suited for active preheating.